Techgal - buy software Administrator
     member is offline
![[avatar]](http://s1.images.proboards.com/avatars/paintingbird.gif)
What doesn't kill you makes you stronger
Joined: May 2008 Posts: 40 Location: West Virginia Karma: 0 |  | Lexmark 12A1990 Photo Cartridge « Thread Started on May 26, 2008, 6:05am » | |
Photo Color Cartridge 1. To locate the filler holes of the cartridge you must remove the plastic cover. This cover must be removed before refilling by carefully prying it off with a thin metal blade, such as a utility knife. Important: Make certain not to damage the sensors on the back of the cartridge.
2. Attach the needle to the syringe and fill with the correct color ink.
3. Insert the filling needle into the corresponding filler hole of the color to be refilled, (see diagram) and push as far down into the cartridge. Note: You may feel a slight pressure because the cartridge contains a sponge.
4. Inject approximately 4 ml. of ink or until the sponge is soaked. Important: The sponge inside is white. In order to prevent overfilling the cartridge do not change the color of the sponge to the color you are filling. When the ink just begins to surface where the needle is inserted, stop filling, the cartridge is full.
5. Unused ink may be returned to the bottle. Rinse the syringe and needle with water, dry and store for further use. Then start the process with the next color with a new syringe/tip. Our kits come with 4 fill syringes/tips so there is no cross-contamination of colors.
6. After refilling, the top can be refitted and fixed with adhesive tape.
Note: Immediately refill any empty cartridges.
| |
|